Page 1 of 2
Next
Guide needs to include that air compressor must be bled daily. If you are the last person using the compressor, turn off and open the bleed valve.
If you need to change tools, MPG proveout will not be useful. It is better to change tool before loading program using processor and then test run in MPG proveout
Add "press the hand button" or something or else you wont be able to select "Origin / Tool"
Need to add "click 'axes / spindle' button" to beginning of step.
First direction should say "activate part program" instead of "part program management"
Does one need to wait for the air compressor to fully pressurize before powering on the machine?
Add spinning / dangling item danger? Particularly for A axis.
Add Safe Z height setting (Z1) to Vcarbe guide.
Need to ensure checks are stamped "for deposit only"
New members can ONLY sign up for open hours memberships. After a month of Open Hours, members may choose to upgrade to "Full Access".
Guide needs to include that air compressor must be bled daily. If you are the last person using the compressor, turn off and open the bleed valve.
If you need to change tools, MPG proveout will not be useful. It is better to change tool before loading program using processor and then test run in MPG proveout
Add "press the hand button" or something or else you wont be able to select "Origin / Tool"
Need to add "click 'axes / spindle' button" to beginning of step.
First direction should say "activate part program" instead of "part program management"
Does one need to wait for the air compressor to fully pressurize before powering on the machine?
Add spinning / dangling item danger? Particularly for A axis.
Add Safe Z height setting (Z1) to Vcarbe guide.
Need to ensure checks are stamped "for deposit only"
New members can ONLY sign up for open hours memberships. After a month of Open Hours, members may choose to upgrade to "Full Access".
Page 1 of 2
Next