Skip to main content
Editing Step 2 —

Step Type:

Drag to rearrange

Turn valve on tank counterclockwise to open.

With tank on, slowly turn the regulator valve clockwise until the desired pressure is reached. (Normally between 6-10 psi, NOT more than 10 psi.)

The red zone, on the psi gauge, indicates a highly dangerous zone! Operating the torch above the instructed 10 psi can be hazardous. If you notice the gauge is rising and not holding steady, turn the tank off. Then call Heather 517-203-6482.

Your contributions are licensed under the open source Creative Commons license.