Reminder that this laser and program were created for engineers doing repeatable designs. Different materials have specific settings already setup.

Go to Material, click arrow menu/dropdown. Find your material in the list. For this checkout, select “Wood Birch”

Click each color, and assign it to a setting.

Settings are named very differently from other programs.

If you would like fill, select Engrave Dark

If you would like to etch lines, select Line engrave-Med

If you would like to cut, select Cut Speed

Colors should now show next to the correct setting name. No color blocks should remain next to “Unassigned” or “Engrave Dark”. Check for unassigned layers.