Difficulty
Moderate
Steps
3
Time Required
- Rolling Mill Overview SOP 3 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Introduction
An overview of the Rolling Mill anatomy. What each parts are, and what they do.
-
-
The big rollers on the top for flattening metal pieces into a thin(ner) sheet
-
Only soft metals allowed (copper, silver, etc). DO NOT USE STEEL (or other hard metals equivalent) as it will scar the rollers
-
Watch your fingers as you feed in the metal
-
-
-
spins all the roller attached
-
-
-
Adjusts the space between the top flat rollers
-
Use the circular ruler to keep track of how far to turn
-
