Skip to main content

Introduction

Sometimes the jog speed has been adjusted by another member to be too fast to accurately position the head, or maddeningly slow. This procedure will describe how to adjust the speed of the jog.

  1. You should be in jog mode (pressing the arrow keys should move the laser head)
    • You should be in jog mode (pressing the arrow keys should move the laser head)

    • Press the Speed key on the control panel.

  2. Use the arrow keys to adjust the jog speed.
    • Use the arrow keys to adjust the jog speed.

    • Press the left and right arrow keys to move the cursor left or right a digit.

    • Press the up and down arrow keys to change the number higher or lower.

  3. Press the enter key to save the new speed setting.
    • Press the enter key to save the new speed setting.

Finish Line

Brian Adams

Member since: 02/26/2018

8,892 Reputation

54 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 11

All Time: 920