Difficulty
Moderate
Steps
1
Time Required
- 04 - Shutting Down 1 step
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Introduction
How to shut down SawStop table saw.
-
-
Turn off power switch.
-
Install plastic blade guard.
-
Lower the blade below the surface of the table.
-
Slide fence to the left next to blade and lock in place.
-
Discard of any cut offs or scrap materials.
-
Sweep and vacuum all sawdust.
-
Almost done!
Finish Line
