Changes to Step #9
Step Lines
| + | [title] Assign colors to settings. |
|---|---|
| + | [* 10] Reminder that this laser and program were created for engineers doing repeatable designs. Different materials have specific settings already setup. |
| + | [* 1] Go to Material, click arrow menu/dropdown. Find your material in the list. For this checkout, select “Wood Birch” |
| + | [* 1] Click each color, and assign it to a setting. |
| + | [* 9] Settings are named very differently from other programs. |
| + | [* 1] If you would like fill, select Engrave Dark |
| + | [* 1] If you would like to etch lines, select Cut Quality |
| + | [* 1] If you would like to cut, select Cut Speed |
| + | [* 1] Colors should now show next to the correct setting name. No color blocks should remain next to “Unassigned” or “Engrave Dark”. Check for unassigned layers. |
Image 1
No previous image
Added
Image 2
No previous image
Added