Changes to Step #4
Edit by Blake Wilson —
Edit approved by Blake Wilson
- Before
- After
- Unchanged
Step Lines
| [title] Machine Overview | |
| [* 1] The machine consists of a X-axis gantry that rides along the Y-axis of the frame. | |
| [* 1] The spindle is mounted to the X-axis gantry and can be moved up and down (Z-axis). | |
| [* 1] The A-axis (rotary) is to the left of the bed and consists of a 3 jaw chuck and a movable tail stock which. The A-axis rotates parallel to the Y-axis. | |
| [* 1] The tool rack is at the back of the machine. It has 10 slots and the tools are numbered sequentially 1-10 from left to right. | |
| [* 1] The black phenolic vacuum table distributes vacuum pressure to the spoil board in 4 zones. | |
| - | [* 1] The vacuum pumps for the bed are behind the machine on a wooden rack. |
| - | [* 1] The dust collector is behind the main control panel. |