Skip to main content
    • Turn the oxygen (green) and fuel (red) torch knobs clockwise until closed.

    • Turn the oxygen tank valve clockwise until completely closed.

    • Turn the propane tank valve until completely closed.

    • Non-Regulated valves turn counter-clockwise

    • Regulated valves turn clockwise

    • Remove torch tip.

    • Caution: Tip may be hot!

    • Open Green oxygen torch knob 1/2 turn until oxygen flow stops and both regulator gauges read zero.

    • The left pressure gauge will go up during the process, this is normal.

    • Open red propane torch knob 1/2 turn until flow stops.

    • Turn both torch knobs clockwise until closed

    • Secure torch hoses.

    • turn the regulators until you do not feel spring pressure. if the screw comes out, yo went too far. Screw it back in one to two full turns.

Finish Line

Brian Baldwin

Member since: 07/28/2022

1 Reputation

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 5

All Time: 25