Difficulty
Very easy
Steps
5
Time Required
- Guest brought in a token! 5 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
-
-
Take token from guest and leave in the bowl at front desk
-
Please discourage the guest from keeping the token. We use these to track where they were found and how many keychains were made
-
However, they can keep it if they really want. Please write down in the work log how many people made keychains and where they found them
-
One keychain per person
-
If someone comes in without a token, they can still make a kychain
-
Invite the guest(s) to join mailing list
-
Have guest read and sign the liability waiver
-
-
-
-
Grab the following from the cupboard: keyring, woodcut keychain, template
-
grab safety glasses and head to the laser room!
-
If laser is occupied, give tour and invite guest back another time for the keychain
-
-
-
open "Keychain" on desktop
-
Have guest add name, date, or whatever they'd like
-
Adjust the settings to match in the step picture
-
Click send and save as "keychain"
-
-
-
place the template on the machine bed
-
make sure template is square in the bed
-
set the origin to where indicated on the template
-
put a magnet down to make sure the template doesn't move
-
Put keychain into template as seen in the step thumbnail
-
-
-
open "keychain" at the laser cutter
-
Press "frame" to make sure it's going to etch the correct area
-
close lid! Make sure all switches are on
-
hit start, and marvel!
-
Guest receives keychain and ring
-
There is protective masking tape to be peeled off the side they just etched
-
Please put template back into cupboard where you found it
-
