Skip to main content
  1. Take token from guest and leave in the bowl at front desk
    • Take token from guest and leave in the bowl at front desk

    • Please discourage the guest from keeping the token. We use these to track where they were found and how many keychains were made

    • However, they can keep it if they really want. Please write down in the work log how many people made keychains and where they found them

    • One keychain per person

    • If someone comes in without a token, they can still make a kychain

    • Invite the guest(s) to join mailing list

    • Have guest read and sign the liability waiver

    • https://www.lansingmakersnetwork.org/e-n...

    • Grab the following from the cupboard: keyring, woodcut keychain, template

    • grab safety glasses and head to the laser room!

    • If laser is occupied, give tour and invite guest back another time for the keychain

    • open "Keychain" on desktop

    • Have guest add name, date, or whatever they'd like

    • Adjust the settings to match in the step picture

    • Click send and save as "keychain"

    • place the template on the machine bed

    • make sure template is square in the bed

    • set the origin to where indicated on the template

    • put a magnet down to make sure the template doesn't move

    • Put keychain into template as seen in the step thumbnail

    • open "keychain" at the laser cutter

    • Press "frame" to make sure it's going to etch the correct area

    • close lid! Make sure all switches are on

    • hit start, and marvel!

    • Guest receives keychain and ring

    • There is protective masking tape to be peeled off the side they just etched

    • Please put template back into cupboard where you found it

Finish Line

Evelyn

Member since: 12/12/2021

1 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 1

All Time: 22